backup Arch and Niri configuration

config/btop/btop.conf

@@ -0,0 +1,286 @@
+#? Config file for btop v.1.4.7
+
+#* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
+#* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
+color_theme = "Default"
+
+#* If the theme set background should be shown, set to False if you want terminal background transparency.
+theme_background = true
+
+#* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
+truecolor = true
+
+#* Set to true to force tty mode regardless if a real tty has been detected or not.
+#* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
+force_tty = false
+
+#* Option to disable presets. Either the default preset, custom presets, or all presets.
+#* "Off" All presets are enabled.
+#* "Default" preset is disabled.#* "Custom" presets are disabled.#* "All" presets are disabled.
+disable_presets = "Off"
+
+#* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
+#* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
+#* Use whitespace " " as separator between different presets.
+#* Example: "cpu:0:default,mem:0:tty,proc:1:default cpu:0:braille,proc:0:tty"
+presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:default cpu:0:block,net:0:tty"
+
+#* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
+#* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
+vim_keys = false
+
+#* Disable all mouse events.
+disable_mouse = false
+
+#* Rounded corners on boxes, is ignored if TTY mode is ON.
+rounded_corners = true
+
+#* Use terminal synchronized output sequences to reduce flickering on supported terminals.
+terminal_sync = true
+
+#* Default symbols to use for graph creation, "braille", "block" or "tty".
+#* "braille" offers the highest resolution but might not be included in all fonts.
+#* "block" has half the resolution of braille but uses more common characters.
+#* "tty" uses only 3 different symbols but will work with most fonts and should work in a real TTY.
+#* Note that "tty" only has half the horizontal resolution of the other two, so will show a shorter historical view.
+graph_symbol = "braille"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_cpu = "default"
+
+# Graph symbol to use for graphs in gpu box, "default", "braille", "block" or "tty".
+graph_symbol_gpu = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_mem = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_net = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_proc = "default"
+
+#* Manually set which boxes to show. Available values are "cpu mem net proc" and "gpu0" through "gpu5", separate values with whitespace.
+shown_boxes = "cpu mem net proc"
+
+#* Update time in milliseconds, recommended 2000 ms or above for better sample times for graphs.
+update_ms = 2000
+
+#* Processes sorting, "pid" "program" "arguments" "threads" "user" "memory" "cpu lazy" "cpu direct",
+#* "cpu lazy" sorts top process over time (easier to follow), "cpu direct" updates top process directly.
+proc_sorting = "cpu lazy"
+
+#* Reverse sorting order, True or False.
+proc_reversed = false
+
+#* Show processes as a tree.
+proc_tree = false
+
+#* Use the cpu graph colors in the process list.
+proc_colors = true
+
+#* Use a darkening gradient in the process list.
+proc_gradient = true
+
+#* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
+proc_per_core = false
+
+#* Show process memory as bytes instead of percent.
+proc_mem_bytes = true
+
+#* Show cpu graph for each process.
+proc_cpu_graphs = true
+
+#* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
+proc_info_smaps = false
+
+#* Show proc box on left side of screen instead of right.
+proc_left = false
+
+#* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
+proc_filter_kernel = false
+
+#* Should the process list follow the selected process when detailed view is open.
+proc_follow_detailed = true
+
+#* In tree-view, always accumulate child process resources in the parent process.
+proc_aggregate = false
+
+#* Should cpu and memory usage display be preserved for dead processes when paused.
+keep_dead_proc_usage = false
+
+#* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
+#* Select from a list of detected attributes from the options menu.
+cpu_graph_upper = "Auto"
+
+#* Sets the CPU stat shown in lower half of the CPU graph, "total" is always available.
+#* Select from a list of detected attributes from the options menu.
+cpu_graph_lower = "Auto"
+
+#* If gpu info should be shown in the cpu box. Available values = "Auto", "On" and "Off".
+show_gpu_info = "Auto"
+
+#* Toggles if the lower CPU graph should be inverted.
+cpu_invert_lower = true
+
+#* Set to True to completely disable the lower CPU graph.
+cpu_single_graph = false
+
+#* Show cpu box at bottom of screen instead of top.
+cpu_bottom = false
+
+#* Shows the system uptime in the CPU box.
+show_uptime = true
+
+#* Shows the CPU package current power consumption in watts. Requires running `make setcap` or `make setuid` or running with sudo.
+show_cpu_watts = true
+
+#* Show cpu temperature.
+check_temp = true
+
+#* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
+cpu_sensor = "Auto"
+
+#* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
+show_coretemp = true
+
+#* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
+#* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
+#* Format "x:y" x=core with wrong temp, y=core with correct temp, use space as separator between multiple entries.
+#* Example: "4:0 5:1 6:3"
+cpu_core_map = ""
+
+#* Which temperature scale to use, available values: "celsius", "fahrenheit", "kelvin" and "rankine".
+temp_scale = "celsius"
+
+#* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
+base_10_sizes = false
+
+#* Show CPU frequency.
+show_cpu_freq = true
+
+#* How to calculate CPU frequency, available values: "first", "range", "lowest", "highest" and "average".
+freq_mode = "first"
+
+#* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
+#* Special formatting: /host = hostname | /user = username | /uptime = system uptime
+clock_format = "%X"
+
+#* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
+background_update = true
+
+#* Custom cpu model name, empty string to disable.
+custom_cpu_name = ""
+
+#* Optional filter for shown disks, should be full path of a mountpoint, separate multiple values with whitespace " ".
+#* Only disks matching the filter will be shown. Prepend exclude= to only show disks not matching the filter. Examples: disk_filter="/boot /home/user", disks_filter="exclude=/boot /home/user"
+disks_filter = ""
+
+#* Show graphs instead of meters for memory values.
+mem_graphs = true
+
+#* Show mem box below net box instead of above.
+mem_below_net = false
+
+#* Count ZFS ARC in cached and available memory.
+zfs_arc_cached = true
+
+#* If swap memory should be shown in memory box.
+show_swap = true
+
+#* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
+swap_disk = true
+
+#* If mem box should be split to also show disks info.
+show_disks = true
+
+#* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
+only_physical = true
+
+#* Read disks list from /etc/fstab. This also disables only_physical.
+use_fstab = true
+
+#* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
+zfs_hide_datasets = false
+
+#* Set to true to show available disk space for privileged users.
+disk_free_priv = false
+
+#* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
+show_io_stat = true
+
+#* Toggles io mode for disks, showing big graphs for disk read/write speeds.
+io_mode = false
+
+#* Set to True to show combined read/write io graphs in io mode.
+io_graph_combined = false
+
+#* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
+#* Example: "/mnt/media:100 /:20 /boot:1".
+io_graph_speeds = ""
+
+#* Swap the positions of the upload and download speed graphs. When true, upload will be on top.
+swap_upload_download = false
+
+#* Set fixed values for network graphs in Mebibits. Is only used if net_auto is also set to False.
+net_download = 100
+
+net_upload = 100
+
+#* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
+net_auto = true
+
+#* Sync the auto scaling for download and upload to whichever currently has the highest scale.
+net_sync = true
+
+#* Starts with the Network Interface specified here.
+net_iface = ""
+
+#* "True" shows bitrates in base 10 (Kbps, Mbps). "False" shows bitrates in binary sizes (Kibps, Mibps, etc.). "Auto" uses base_10_sizes.
+base_10_bitrate = "Auto"
+
+#* Show battery stats in top right if battery is present.
+show_battery = true
+
+#* Which battery to use if multiple are present. "Auto" for auto detection.
+selected_battery = "Auto"
+
+#* Show power stats of battery next to charge indicator.
+show_battery_watts = true
+
+#* Set loglevel for "~/.local/state/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
+#* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
+log_level = "WARNING"
+
+#* Automatically save current settings to config file on exit.
+save_config_on_exit = true
+
+#* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
+nvml_measure_pcie_speeds = true
+
+#* Measure PCIe throughput on AMD cards, may impact performance on certain cards.
+rsmi_measure_pcie_speeds = true
+
+#* Horizontally mirror the GPU graph.
+gpu_mirror_graph = true
+
+#* Set which GPU vendors to show. Available values are "nvidia amd intel apple"
+shown_gpus = "nvidia amd intel apple"
+
+#* Custom gpu0 model name, empty string to disable.
+custom_gpu_name0 = ""
+
+#* Custom gpu1 model name, empty string to disable.
+custom_gpu_name1 = ""
+
+#* Custom gpu2 model name, empty string to disable.
+custom_gpu_name2 = ""
+
+#* Custom gpu3 model name, empty string to disable.
+custom_gpu_name3 = ""
+
+#* Custom gpu4 model name, empty string to disable.
+custom_gpu_name4 = ""
+
+#* Custom gpu5 model name, empty string to disable.
+custom_gpu_name5 = ""

config/fcitx5/conf/classicui.conf

@@ -0,0 +1,35 @@
+# Vertical Candidate List
+Vertical Candidate List=False
+# Use mouse wheel to go to prev or next page
+WheelForPaging=True
+# Font
+Font="Sans 10"
+# Menu Font
+MenuFont="Sans 10"
+# Tray Font
+TrayFont="Sans Bold 10"
+# Tray Label Outline Color
+TrayOutlineColor=#000000
+# Tray Label Text Color
+TrayTextColor=#ffffff
+# Prefer Text Icon
+PreferTextIcon=False
+# Show Layout Name In Icon
+ShowLayoutNameInIcon=True
+# Use input method language to display text
+UseInputMethodLanguageToDisplayText=True
+# Theme
+Theme=catppuccin-mocha-mauve
+# Dark Theme
+DarkTheme=catppuccin-mocha-mauve
+# Follow system light/dark color scheme
+UseDarkTheme=False
+# Follow system accent color if it is supported by theme and desktop
+UseAccentColor=True
+# Use Per Screen DPI on X11
+PerScreenDPI=False
+# Force font DPI on Wayland
+ForceWaylandDPI=0
+# Enable fractional scale under Wayland
+EnableFractionalScale=True
+

config/fcitx5/conf/notifications.conf

@@ -0,0 +1,3 @@
+# 隐藏通知
+HiddenNotifications=
+

config/fcitx5/config

@@ -0,0 +1,83 @@
+[Hotkey]
+# Enumerate when holding modifier of Toggle key
+EnumerateWithTriggerKeys=True
+# Enumerate Input Method Forward
+EnumerateForwardKeys=
+# Enumerate Input Method Backward
+EnumerateBackwardKeys=
+# Skip first input method while enumerating
+EnumerateSkipFirst=False
+# Time limit in milliseconds for triggering modifier key shortcuts
+ModifierOnlyKeyTimeout=250
+
+[Hotkey/TriggerKeys]
+0=Control+space
+1=Zenkaku_Hankaku
+2=Hangul
+
+[Hotkey/ActivateKeys]
+0=Hangul_Hanja
+
+[Hotkey/DeactivateKeys]
+0=Hangul_Romaja
+
+[Hotkey/AltTriggerKeys]
+0=Shift_L
+
+[Hotkey/EnumerateGroupForwardKeys]
+0=Super+space
+
+[Hotkey/EnumerateGroupBackwardKeys]
+0=Shift+Super+space
+
+[Hotkey/PrevPage]
+0=Up
+
+[Hotkey/NextPage]
+0=Down
+
+[Hotkey/PrevCandidate]
+0=Shift+Tab
+
+[Hotkey/NextCandidate]
+0=Tab
+
+[Hotkey/TogglePreedit]
+0=Control+Alt+P
+
+[Behavior]
+# Activate input method by default
+ActiveByDefault=False
+# Reset state on Focus In
+resetStateWhenFocusIn=No
+# Share Input State
+ShareInputState=No
+# Show preedit in application
+PreeditEnabledByDefault=True
+# Show Input Method Information when switch input method
+ShowInputMethodInformation=True
+# Show Input Method Information when changing focus
+showInputMethodInformationWhenFocusIn=False
+# Show compact input method information
+CompactInputMethodInformation=True
+# Show first input method information
+ShowFirstInputMethodInformation=True
+# Default Candidates per page
+DefaultPageSize=5
+# Override XKB Option
+OverrideXkbOption=False
+# Custom XKB Option
+CustomXkbOption=
+# Force Enabled Addons
+EnabledAddons=
+# Force Disabled Addons
+DisabledAddons=
+# Preload input method to be used by default
+PreloadInputMethod=True
+# Allow input method in the password field
+AllowInputMethodForPassword=False
+# Show preedit text when typing password
+ShowPreeditForPassword=False
+# Interval of saving user data in minutes
+AutoSavePeriod=30
+

config/fcitx5/profile

@@ -0,0 +1,23 @@
+[Groups/0]
+# Group Name
+Name=Default
+# Layout
+Default Layout=us
+# Default Input Method
+DefaultIM=rime
+
+[Groups/0/Items/0]
+# Name
+Name=keyboard-us
+# Layout
+Layout=
+
+[Groups/0/Items/1]
+# Name
+Name=rime
+# Layout
+Layout=
+
+[GroupOrder]
+0=Default
+

config/fcitx5/profile_pnuv01

@@ -0,0 +1,23 @@
+[Groups/0]
+# Group Name
+Name=Default
+# Layout
+Default Layout=us
+# Default Input Method
+DefaultIM=rime
+
+[Groups/0/Items/0]
+# Name
+Name=keyboard-us
+# Layout
+Layout=
+
+[Groups/0/Items/1]
+# Name
+Name=rime
+# Layout
+Layout=
+
+[GroupOrder]
+0=Default
+

config/fuzzel/fuzzel.ini

@@ -0,0 +1,36 @@
+[main]
+# 紧凑、清晰的应用启动器布局
+font=sans-serif:size=13
+use-bold=yes
+prompt=“⌕  ”
+width=27
+lines=10
+horizontal-pad=24
+vertical-pad=14
+inner-pad=8
+image-size-ratio=0.55
+match-counter=yes
+
+[colors]
+# 格式为 RRGGBBAA；背景 alpha=d6，约 84% 不透明
+background=111827d6
+text=e5e7ebff
+prompt=7fc8ffff
+placeholder=94a3b8ff
+input=f8fafcff
+match=7fc8ffff
+# 选中项也保留轻微透明感
+selection=2563a6b8
+selection-text=ffffffff
+selection-match=b9e4ffff
+counter=94a3b8ff
+border=7fc8ffb3
+
+[border]
+width=2
+radius=14
+
+[key-bindings]
+# 整页浏览：Page Up / Page Down，或 Ctrl+方向键
+prev-page=Page_Up KP_Page_Up Control+Up
+next-page=Page_Down KP_Page_Down Control+Down

config/kitty/kitty.conf

@@ -0,0 +1,2 @@
+font_family WenQuanYi Micro Hei Mono
+font_size 13

config/mako/config

@@ -0,0 +1,40 @@
+# Mako 通知守护进程配置
+
+font=Sans 11
+background-color=#202020F2
+text-color=#F2F2F2FF
+
+width=360
+height=160
+outer-margin=16
+margin=8
+padding=12
+
+border-size=2
+border-color=#7FC8FFFF
+border-radius=8
+
+progress-color=over #7FC8FFFF
+icons=1
+max-icon-size=48
+icon-border-radius=8
+
+markup=1
+actions=1
+max-visible=5
+max-history=100
+history=1
+default-timeout=5000
+
+anchor=top-right
+layer=overlay
+
+[urgency=low]
+border-color=#505050FF
+default-timeout=3000
+
+[urgency=critical]
+background-color=#3A1010F2
+border-color=#FF6B6BFF
+default-timeout=0
+ignore-timeout=1

config/niri/config.kdl

@@ -0,0 +1,725 @@
+// ============================================================================
+// Niri 主配置
+// KDL 语法文档：https://kdl.dev
+// Niri 配置文档：https://niri-wm.github.io/niri/Configuration:-Introduction
+// ============================================================================
+
+
+
+
+  environment {
+      // 基础 locale 使用系统已经安装的英文环境
+      LANG "en_US.UTF-8"
+
+      // 软件界面优先显示简体中文，缺少翻译时回退英文
+      LANGUAGE "zh_CN:en_US"
+
+      // 避免继承的 LC_ALL 覆盖 LANG
+      LC_ALL null
+
+      // Fcitx5 compatibility for applications such as WeChat.
+      GTK_IM_MODULE "fcitx"
+      QT_IM_MODULE "fcitx"
+      XMODIFIERS "@im=fcitx"
+  }
+
+// ----------------------------------------------------------------------------
+// 1. 输入设备与手势
+// ----------------------------------------------------------------------------
+input {
+    keyboard {
+        xkb {
+            // You can set rules, model, layout, variant and options.
+            // For more information, see xkeyboard-config(7).
+
+            // For example:
+            // layout "us,ru"
+            // options "grp:win_space_toggle,compose:ralt,ctrl:nocaps"
+
+            // If this section is empty, niri will fetch xkb settings
+            // from org.freedesktop.locale1. You can control these using
+            // localectl set-x11-keymap.
+        }
+
+        // Enable numlock on startup, omitting this setting disables it.
+        numlock
+    }
+
+    // Next sections include libinput settings.
+    // Omitting settings disables them, or leaves them at their default values.
+    // All commented-out settings here are examples, not defaults.
+    touchpad {
+        // off
+        tap
+        // dwt
+        // dwtp
+        // drag false
+        // drag-lock
+        natural-scroll
+        // accel-speed 0.2
+        // accel-profile "flat"
+        // scroll-method "two-finger"
+        // disabled-on-external-mouse
+    }
+
+    mouse {
+        // off
+        // natural-scroll
+        // accel-speed 0.2
+        // accel-profile "flat"
+        // scroll-method "no-scroll"
+    }
+
+    trackpoint {
+        // off
+        // natural-scroll
+        // accel-speed 0.2
+        // accel-profile "flat"
+        // scroll-method "on-button-down"
+        // scroll-button 273
+        // scroll-button-lock
+        // middle-emulation
+    }
+
+    // Uncomment this to make the mouse warp to the center of newly focused windows.
+    // warp-mouse-to-focus
+
+    // Focus windows and outputs automatically when moving the mouse into them.
+    // Setting max-scroll-amount="0%" makes it work only on windows already fully on screen.
+    // focus-follows-mouse max-scroll-amount="0%"
+}
+
+// 关闭鼠标触碰屏幕角落时自动打开 Overview；Mod+O 快捷键不受影响。
+gestures {
+    hot-corners {
+        off
+    }
+}
+
+// ----------------------------------------------------------------------------
+// 2. 显示器
+// 小米外接屏位于上方，笔记本内屏位于下方并水平居中。
+// ----------------------------------------------------------------------------
+output "eDP-1" {
+    mode "1920x1080@59.977"
+    scale 1
+    transform "normal"
+    position x=320 y=1440
+}
+
+output "HDMI-A-1" {
+    mode "2560x1440@59.951"
+    scale 1
+    transform "normal"
+    position x=0 y=0
+}
+
+// ----------------------------------------------------------------------------
+// 3. 窗口布局与外观
+// ----------------------------------------------------------------------------
+layout {
+    // 让 Overview 的工作区底色透明，显示固定在 backdrop 中的 Awww 壁纸。
+    background-color "transparent"
+
+    // Set gaps around windows in logical pixels.
+    gaps 16
+
+    // When to center a column when changing focus, options are:
+    // - "never", default behavior, focusing an off-screen column will keep at the left
+    //   or right edge of the screen.
+    // - "always", the focused column will always be centered.
+    // - "on-overflow", focusing a column will center it if it doesn't fit
+    //   together with the previously focused column.
+    center-focused-column "never"
+
+    // You can customize the widths that "switch-preset-column-width" (Mod+R) toggles between.
+    preset-column-widths {
+        // Proportion sets the width as a fraction of the output width, taking gaps into account.
+        // For example, you can perfectly fit four windows sized "proportion 0.25" on an output.
+        // The default preset widths are 1/3, 1/2 and 2/3 of the output.
+        proportion 0.33333
+        proportion 0.5
+        proportion 0.66667
+
+        // Fixed sets the width in logical pixels exactly.
+        // fixed 1920
+    }
+
+    // You can also customize the heights that "switch-preset-window-height" (Mod+Ctrl+Shift+R) toggles between.
+    // preset-window-heights { }
+
+    // You can change the default width of the new windows.
+    default-column-width { proportion 0.5; }
+    // If you leave the brackets empty, the windows themselves will decide their initial width.
+    // default-column-width {}
+
+    // By default focus ring and border are rendered as a solid background rectangle
+    // behind windows. That is, they will show up through semitransparent windows.
+    // This is because windows using client-side decorations can have an arbitrary shape.
+    //
+    // If you don't like that, you should uncomment `prefer-no-csd` below.
+    // Niri will draw focus ring and border *around* windows that agree to omit their
+    // client-side decorations.
+    //
+    // Alternatively, you can override it with a window rule called
+    // `draw-border-with-background`.
+
+    // You can change how the focus ring looks.
+    focus-ring {
+        // Uncomment this line to disable the focus ring.
+        // off
+
+        // How many logical pixels the ring extends out from the windows.
+        width 2
+
+        // Colors can be set in a variety of ways:
+        // - CSS named colors: "red"
+        // - RGB hex: "#rgb", "#rgba", "#rrggbb", "#rrggbbaa"
+        // - CSS-like notation: "rgb(255, 127, 0)", rgba(), hsl() and a few others.
+
+        // Color of the ring on the active monitor.
+        active-color "#7fc8ff"
+
+        // Color of the ring on inactive monitors.
+        //
+        // The focus ring only draws around the active window, so the only place
+        // where you can see its inactive-color is on other monitors.
+        inactive-color "#505050"
+
+        // You can also use gradients. They take precedence over solid colors.
+        // Gradients are rendered the same as CSS linear-gradient(angle, from, to).
+        // The angle is the same as in linear-gradient, and is optional,
+        // defaulting to 180 (top-to-bottom gradient).
+        // You can use any CSS linear-gradient tool on the web to set these up.
+        // Changing the color space is also supported, check the wiki for more info.
+        //
+        // active-gradient from="#80c8ff" to="#c7ff7f" angle=45
+
+        // You can also color the gradient relative to the entire view
+        // of the workspace, rather than relative to just the window itself.
+        // To do that, set relative-to="workspace-view".
+        //
+        // inactive-gradient from="#505050" to="#808080" angle=45 relative-to="workspace-view"
+    }
+
+    // You can also add a border. It's similar to the focus ring, but always visible.
+    border {
+        // The settings are the same as for the focus ring.
+        // If you enable the border, you probably want to disable the focus ring.
+        off
+
+        width 4
+        active-color "#ffc87f"
+        inactive-color "#505050"
+
+        // Color of the border around windows that request your attention.
+        urgent-color "#9b0000"
+
+        // Gradients can use a few different interpolation color spaces.
+        // For example, this is a pastel rainbow gradient via in="oklch longer hue".
+        //
+        // active-gradient from="#e5989b" to="#ffb4a2" angle=45 relative-to="workspace-view" in="oklch longer hue"
+
+        // inactive-gradient from="#505050" to="#808080" angle=45 relative-to="workspace-view"
+    }
+
+    // You can enable drop shadows for windows.
+    shadow {
+        // Uncomment the next line to enable shadows.
+        // on
+
+        // By default, the shadow draws only around its window, and not behind it.
+        // Uncomment this setting to make the shadow draw behind its window.
+        //
+        // Note that niri has no way of knowing about the CSD window corner
+        // radius. It has to assume that windows have square corners, leading to
+        // shadow artifacts inside the CSD rounded corners. This setting fixes
+        // those artifacts.
+        //
+        // However, instead you may want to set prefer-no-csd and/or
+        // geometry-corner-radius. Then, niri will know the corner radius and
+        // draw the shadow correctly, without having to draw it behind the
+        // window. These will also remove client-side shadows if the window
+        // draws any.
+        //
+        // draw-behind-window true
+
+        // You can change how shadows look. The values below are in logical
+        // pixels and match the CSS box-shadow properties.
+
+        // Softness controls the shadow blur radius.
+        softness 30
+
+        // Spread expands the shadow.
+        spread 5
+
+        // Offset moves the shadow relative to the window.
+        offset x=0 y=5
+
+        // You can also change the shadow color and opacity.
+        color "#0007"
+    }
+
+    // Struts shrink the area occupied by windows, similarly to layer-shell panels.
+    // You can think of them as a kind of outer gaps. They are set in logical pixels.
+    // Left and right struts will cause the next window to the side to always be visible.
+    // Top and bottom struts will simply add outer gaps in addition to the area occupied by
+    // layer-shell panels and regular gaps.
+    struts {
+        // left 64
+        // right 64
+        // 抵消 10px 顶部外间距，保留约 6px 距离。
+        top -10
+        // bottom 64
+    }
+}
+
+// ----------------------------------------------------------------------------
+// 4. 会话与自启动
+// ----------------------------------------------------------------------------
+// 状态栏
+spawn-at-startup "waybar"
+// Polkit 图形认证代理
+spawn-at-startup "/usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1"
+// 桌面通知服务
+spawn-at-startup "mako"
+// 中文输入法
+spawn-at-startup "fcitx5" "-d"
+// Awww 壁纸守护进程，供 Waypaper 设置和切换壁纸。
+spawn-at-startup "awww-daemon"
+
+// 将 Awww 壁纸固定在 Overview 的背景层中。
+layer-rule {
+    match namespace="^awww-daemon$"
+    place-within-backdrop true
+}
+
+// To run a shell command (with variables, pipes, etc.), use spawn-sh-at-startup:
+// spawn-sh-at-startup "qs -c ~/source/qs/MyAwesomeShell"
+
+hotkey-overlay {
+    // Uncomment this line to disable the "Important Hotkeys" pop-up at startup.
+    // skip-at-startup
+}
+
+// 尽可能移除应用自己的标题栏和客户端装饰；已运行的应用需重启。
+prefer-no-csd
+
+// ----------------------------------------------------------------------------
+// 5. 截图与动画
+// ----------------------------------------------------------------------------
+// 截图文件名包含拍摄日期和时间。
+screenshot-path "~/Pictures/Screenshots/Screenshot from %Y-%m-%d %H-%M-%S.png"
+
+// You can also set this to null to disable saving screenshots to disk.
+// screenshot-path null
+
+// Animation settings.
+// The wiki explains how to configure individual animations:
+// https://niri-wm.github.io/niri/Configuration:-Animations
+animations {
+    // Uncomment to turn off all animations.
+    // off
+
+    // Slow down all animations by this factor. Values below 1 speed them up instead.
+    // slowdown 3.0
+}
+
+// ----------------------------------------------------------------------------
+// 6. 窗口规则
+// ----------------------------------------------------------------------------
+
+// 修复 WezTerm 初次打开时的尺寸问题。
+window-rule {
+    // This regular expression is intentionally made as specific as possible,
+    // since this is the default config, and we want no false positives.
+    // You can get away with just app-id="wezterm" if you want.
+    match app-id=r#"^org\.wezfurlong\.wezterm$"#
+    default-column-width {}
+}
+
+// Firefox 画中画窗口默认浮动。
+window-rule {
+    // This app-id regular expression will work for both:
+    // - host Firefox (app-id is "firefox")
+    // - Flatpak Firefox (app-id is "org.mozilla.firefox")
+    match app-id=r#"firefox$"# title="^Picture-in-Picture$"
+    open-floating true
+}
+
+// Example: block out two password managers from screen capture.
+// (This example rule is commented out with a "/-" in front.)
+/-window-rule {
+    match app-id=r#"^org\.keepassxc\.KeePassXC$"#
+    match app-id=r#"^org\.gnome\.World\.Secrets$"#
+
+    block-out-from "screen-capture"
+
+    // Use this instead if you want them visible on third-party screenshot tools.
+    // block-out-from "screencast"
+}
+
+// 全局使用 8px 圆角；焦点环只画在窗口外侧，不侵入透明背景。
+window-rule {
+    geometry-corner-radius 8
+    clip-to-geometry true
+    draw-border-with-background false
+}
+
+// Kitty 使用 85% 不透明度（15% 透明）。
+window-rule {
+    match app-id=r#"^kitty$"#
+    opacity 0.85
+}
+
+// Visual Studio Code 的实际 app-id 为 code，使用 85% 不透明度。
+window-rule {
+    match app-id=r#"^code$"#
+    opacity 0.85
+}
+
+// 微信使用 85% 不透明度（15% 透明）。
+window-rule {
+    match app-id=r#"(?i)^wechat$"#
+    opacity 0.85
+}
+
+// Telegram 使用 90% 不透明度（10% 透明）。
+window-rule {
+    match app-id=r#"(?i)^org\.telegram\.desktop(\.desktop)?$"#
+    opacity 0.9
+}
+
+// 微信图片和视频查看窗口保持不透明，并默认悬浮。
+window-rule {
+    match app-id=r#"(?i)^wechat$"# title=r#"^图片和视频$"#
+    opacity 1.0
+    open-floating true
+}
+
+// 微信朋友圈窗口保持完全不透明。
+window-rule {
+    match app-id=r#"(?i)^wechat$"# title=r#"^朋友圈$"#
+    opacity 1.0
+}
+
+// Waypaper 默认以浮动窗口打开。
+window-rule {
+    match app-id=r#"(?i)^waypaper$"#
+    open-floating true
+}
+
+// Nautilus 文件管理器默认以浮动窗口打开。
+window-rule {
+    match app-id=r#"^org\.gnome\.Nautilus$"#
+    open-floating true
+}
+
+// Steam 好友列表默认浮动，不影响 Steam 主窗口。
+window-rule {
+    match app-id=r#"^steam$"# title=r#"^Friends List$"#
+    open-floating true
+}
+
+// ----------------------------------------------------------------------------
+// 7. 快捷键
+// Mod 在正常 niri 会话中对应 Super 键。
+// ----------------------------------------------------------------------------
+binds {
+    // Keys consist of modifiers separated by + signs, followed by an XKB key name
+    // in the end. To find an XKB name for a particular key, you may use a program
+    // like wev.
+    //
+    // "Mod" is a special modifier equal to Super when running on a TTY, and to Alt
+    // when running as a winit window.
+    //
+    // Most actions that you can bind here can also be invoked programmatically with
+    // `niri msg action do-something`.
+
+    // --- 帮助与常用程序 -----------------------------------------------------
+    // Mod-Shift-/, which is usually the same as Mod-?,
+    // shows a list of important hotkeys.
+    Mod+Shift+Slash { show-hotkey-overlay; }
+
+    // Suggested binds for running programs: terminal, app launcher, screen locker.
+    Mod+T hotkey-overlay-title="Open a Terminal: alacritty" { spawn "kitty"; }
+    Mod+D hotkey-overlay-title="Run an Application: fuzzel" { spawn "fuzzel"; }
+    Mod+E hotkey-overlay-title="Open File Manager: Nautilus" { spawn "nautilus"; }
+    Mod+A repeat=false hotkey-overlay-title="Take a Screenshot with Mark Shot" { spawn "mark-shot"; }
+    Mod+Alt+W hotkey-overlay-title="Open Waypaper" { spawn "waypaper"; }
+    Super+Alt+L hotkey-overlay-title="Lock the Screen: swaylock" { spawn "swaylock"; }
+
+    // Use spawn-sh to run a shell command. Do this if you need pipes, multiple commands, etc.
+    // Note: the entire command goes as a single argument. It's passed verbatim to `sh -c`.
+    // For example, this is a standard bind to toggle the screen reader (orca).
+    Super+Alt+S allow-when-locked=true hotkey-overlay-title=null { spawn-sh "pkill orca || exec orca"; }
+
+    // --- 音量、媒体与亮度 ---------------------------------------------------
+    // Example volume keys mappings for PipeWire & WirePlumber.
+    // The allow-when-locked=true property makes them work even when the session is locked.
+    // Using spawn-sh allows to pass multiple arguments together with the command.
+    // "-l 1.0" limits the volume to 100%.
+    XF86AudioRaiseVolume allow-when-locked=true { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.1+ -l 1.0"; }
+    XF86AudioLowerVolume allow-when-locked=true { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.1-"; }
+    XF86AudioMute        allow-when-locked=true { spawn-sh "wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle"; }
+    XF86AudioMicMute     allow-when-locked=true { spawn-sh "wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle"; }
+
+    // Example media keys mapping using playerctl.
+    // This will work with any MPRIS-enabled media player.
+    XF86AudioPlay        allow-when-locked=true { spawn-sh "playerctl play-pause"; }
+    XF86AudioStop        allow-when-locked=true { spawn-sh "playerctl stop"; }
+    XF86AudioPrev        allow-when-locked=true { spawn-sh "playerctl previous"; }
+    XF86AudioNext        allow-when-locked=true { spawn-sh "playerctl next"; }
+
+    // Example brightness key mappings for brightnessctl.
+    // You can use regular spawn with multiple arguments too (to avoid going through "sh"),
+    // but you need to manually put each argument in separate "" quotes.
+    XF86MonBrightnessUp allow-when-locked=true { spawn "brightnessctl" "--class=backlight" "set" "+10%"; }
+    XF86MonBrightnessDown allow-when-locked=true { spawn "brightnessctl" "--class=backlight" "set" "10%-"; }
+
+    // --- 窗口焦点与移动 -----------------------------------------------------
+    // Open/close the Overview: a zoomed-out view of workspaces and windows.
+    // You can also move the mouse into the top-left hot corner,
+    // or do a four-finger swipe up on a touchpad.
+    Mod+O repeat=false { toggle-overview; }
+
+    Mod+Q repeat=false { close-window; }
+
+    Mod+Left  { focus-column-left; }
+    Mod+Down  { focus-window-down; }
+    Mod+Up    { focus-window-up; }
+    Mod+Right { focus-column-right; }
+    Mod+H     { focus-column-left; }
+    Mod+J     { focus-window-down; }
+    Mod+K     { focus-window-up; }
+    Mod+L     { focus-column-right; }
+
+    Mod+Ctrl+Left  { move-column-left; }
+    Mod+Ctrl+Down  { move-window-down; }
+    Mod+Ctrl+Up    { move-window-up; }
+    Mod+Ctrl+Right { move-column-right; }
+    Mod+Ctrl+H     { move-column-left; }
+    Mod+Ctrl+J     { move-window-down; }
+    Mod+Ctrl+K     { move-window-up; }
+    Mod+Ctrl+L     { move-column-right; }
+
+    // Alternative commands that move across workspaces when reaching
+    // the first or last window in a column.
+    // Mod+J     { focus-window-or-workspace-down; }
+    // Mod+K     { focus-window-or-workspace-up; }
+    // Mod+Ctrl+J     { move-window-down-or-to-workspace-down; }
+    // Mod+Ctrl+K     { move-window-up-or-to-workspace-up; }
+
+    Mod+Home { focus-column-first; }
+    Mod+End  { focus-column-last; }
+    Mod+Ctrl+Home { move-column-to-first; }
+    Mod+Ctrl+End  { move-column-to-last; }
+
+    // --- 显示器间切换与移动 -------------------------------------------------
+    Mod+Shift+Left  { focus-monitor-left; }
+    Mod+Shift+Down  { focus-monitor-down; }
+    Mod+Shift+Up    { focus-monitor-up; }
+    Mod+Shift+Right { focus-monitor-right; }
+    Mod+Shift+H     { focus-monitor-left; }
+    Mod+Shift+J     { focus-monitor-down; }
+    Mod+Shift+K     { focus-monitor-up; }
+    Mod+Shift+L     { focus-monitor-right; }
+
+    Mod+Shift+Ctrl+Left  { move-column-to-monitor-left; }
+    Mod+Shift+Ctrl+Down  { move-column-to-monitor-down; }
+    Mod+Shift+Ctrl+Up    { move-column-to-monitor-up; }
+    Mod+Shift+Ctrl+Right { move-column-to-monitor-right; }
+    Mod+Shift+Ctrl+H     { move-column-to-monitor-left; }
+    Mod+Shift+Ctrl+J     { move-column-to-monitor-down; }
+    Mod+Shift+Ctrl+K     { move-column-to-monitor-up; }
+    Mod+Shift+Ctrl+L     { move-column-to-monitor-right; }
+
+    // Alternatively, there are commands to move just a single window:
+    // Mod+Shift+Ctrl+Left  { move-window-to-monitor-left; }
+    // ...
+
+    // And you can also move a whole workspace to another monitor:
+    // Mod+Shift+Ctrl+Left  { move-workspace-to-monitor-left; }
+    // ...
+
+    // --- 工作区切换与移动 ---------------------------------------------------
+    Mod+Page_Down      { focus-workspace-down; }
+    Mod+Page_Up        { focus-workspace-up; }
+    Mod+U              { focus-workspace-down; }
+    Mod+I              { focus-workspace-up; }
+    Mod+Ctrl+Page_Down { move-column-to-workspace-down; }
+    Mod+Ctrl+Page_Up   { move-column-to-workspace-up; }
+    Mod+Ctrl+U         { move-column-to-workspace-down; }
+    Mod+Ctrl+I         { move-column-to-workspace-up; }
+
+    // Alternatively, there are commands to move just a single window:
+    // Mod+Ctrl+Page_Down { move-window-to-workspace-down; }
+    // ...
+
+    Mod+Shift+Page_Down { move-workspace-down; }
+    Mod+Shift+Page_Up   { move-workspace-up; }
+    Mod+Shift+U         { move-workspace-down; }
+    Mod+Shift+I         { move-workspace-up; }
+
+    // You can bind mouse wheel scroll ticks using the following syntax.
+    // These binds will change direction based on the natural-scroll setting.
+    //
+    // To avoid scrolling through workspaces really fast, you can use
+    // the cooldown-ms property. The bind will be rate-limited to this value.
+    // You can set a cooldown on any bind, but it's most useful for the wheel.
+    Mod+WheelScrollDown      cooldown-ms=150 { focus-workspace-down; }
+    Mod+WheelScrollUp        cooldown-ms=150 { focus-workspace-up; }
+    Mod+Ctrl+WheelScrollDown cooldown-ms=150 { move-column-to-workspace-down; }
+    Mod+Ctrl+WheelScrollUp   cooldown-ms=150 { move-column-to-workspace-up; }
+
+    Mod+WheelScrollRight      { focus-column-right; }
+    Mod+WheelScrollLeft       { focus-column-left; }
+    Mod+Ctrl+WheelScrollRight { move-column-right; }
+    Mod+Ctrl+WheelScrollLeft  { move-column-left; }
+
+    // Usually scrolling up and down with Shift in applications results in
+    // horizontal scrolling; these binds replicate that.
+    Mod+Shift+WheelScrollDown      { focus-column-right; }
+    Mod+Shift+WheelScrollUp        { focus-column-left; }
+    Mod+Ctrl+Shift+WheelScrollDown { move-column-right; }
+    Mod+Ctrl+Shift+WheelScrollUp   { move-column-left; }
+
+    // Similarly, you can bind touchpad scroll "ticks".
+    // Touchpad scrolling is continuous, so for these binds it is split into
+    // discrete intervals.
+    // These binds are also affected by touchpad's natural-scroll, so these
+    // example binds are "inverted", since we have natural-scroll enabled for
+    // touchpads by default.
+    // Mod+TouchpadScrollDown { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.02+"; }
+    // Mod+TouchpadScrollUp   { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.02-"; }
+
+    // You can refer to workspaces by index. However, keep in mind that
+    // niri is a dynamic workspace system, so these commands are kind of
+    // "best effort". Trying to refer to a workspace index bigger than
+    // the current workspace count will instead refer to the bottommost
+    // (empty) workspace.
+    //
+    // For example, with 2 workspaces + 1 empty, indices 3, 4, 5 and so on
+    // will all refer to the 3rd workspace.
+    Mod+1 { focus-workspace 1; }
+    Mod+2 { focus-workspace 2; }
+    Mod+3 { focus-workspace 3; }
+    Mod+4 { focus-workspace 4; }
+    Mod+5 { focus-workspace 5; }
+    Mod+6 { focus-workspace 6; }
+    Mod+7 { focus-workspace 7; }
+    Mod+8 { focus-workspace 8; }
+    Mod+9 { focus-workspace 9; }
+    Mod+Ctrl+1 { move-column-to-workspace 1; }
+    Mod+Ctrl+2 { move-column-to-workspace 2; }
+    Mod+Ctrl+3 { move-column-to-workspace 3; }
+    Mod+Ctrl+4 { move-column-to-workspace 4; }
+    Mod+Ctrl+5 { move-column-to-workspace 5; }
+    Mod+Ctrl+6 { move-column-to-workspace 6; }
+    Mod+Ctrl+7 { move-column-to-workspace 7; }
+    Mod+Ctrl+8 { move-column-to-workspace 8; }
+    Mod+Ctrl+9 { move-column-to-workspace 9; }
+
+    // Alternatively, there are commands to move just a single window:
+    // Mod+Ctrl+1 { move-window-to-workspace 1; }
+
+    // Switches focus between the current and the previous workspace.
+    // Mod+Tab { focus-workspace-previous; }
+
+    // --- 列、尺寸与布局 -----------------------------------------------------
+    // The following binds move the focused window in and out of a column.
+    // If the window is alone, they will consume it into the nearby column to the side.
+    // If the window is already in a column, they will expel it out.
+    Mod+BracketLeft  { consume-or-expel-window-left; }
+    Mod+BracketRight { consume-or-expel-window-right; }
+
+    // Consume one window from the right to the bottom of the focused column.
+    Mod+Comma  { consume-window-into-column; }
+    // Expel the bottom window from the focused column to the right.
+    Mod+Period { expel-window-from-column; }
+
+    // Cycle through widths set in preset-column-widths.
+    Mod+R { switch-preset-column-width; }
+    // Cycling through the presets in reverse order is also possible.
+    Mod+Shift+R { switch-preset-column-width-back; }
+
+    Mod+Ctrl+Shift+R { switch-preset-window-height; }
+    Mod+Ctrl+R { reset-window-height; }
+
+    Mod+F { maximize-column; }
+    Mod+Shift+F { fullscreen-window; }
+
+    // While maximize-column leaves gaps and borders around the window,
+    // maximize-window-to-edges doesn't: the window expands to the edges of the screen.
+    // This bind corresponds to normal window maximizing,
+    // e.g. by double-clicking on the titlebar.
+    Mod+M { maximize-window-to-edges; }
+
+    // Expand the focused column to space not taken up by other fully visible columns.
+    // Makes the column "fill the rest of the space".
+    Mod+Ctrl+F { expand-column-to-available-width; }
+
+    Mod+C { center-column; }
+
+    // Center all fully visible columns on screen.
+    Mod+Ctrl+C { center-visible-columns; }
+
+    // Finer width adjustments.
+    // This command can also:
+    // * set width in pixels: "1000"
+    // * adjust width in pixels: "-5" or "+5"
+    // * set width as a percentage of screen width: "25%"
+    // * adjust width as a percentage of screen width: "-10%" or "+10%"
+    // Pixel sizes use logical, or scaled, pixels. I.e. on an output with scale 2.0,
+    // set-column-width "100" will make the column occupy 200 physical screen pixels.
+    Mod+Minus { set-column-width "-10%"; }
+    Mod+Equal { set-column-width "+10%"; }
+
+    // Finer height adjustments when in column with other windows.
+    Mod+Shift+Minus { set-window-height "-10%"; }
+    Mod+Shift+Equal { set-window-height "+10%"; }
+
+    // Move the focused window between the floating and the tiling layout.
+    Mod+V       { toggle-window-floating; }
+    Mod+Shift+V { switch-focus-between-floating-and-tiling; }
+
+    // Toggle tabbed column display mode.
+    // Windows in this column will appear as vertical tabs,
+    // rather than stacked on top of each other.
+    Mod+W { toggle-column-tabbed-display; }
+
+    // Actions to switch layouts.
+    // Note: if you uncomment these, make sure you do NOT have
+    // a matching layout switch hotkey configured in xkb options above.
+    // Having both at once on the same hotkey will break the switching,
+    // since it will switch twice upon pressing the hotkey (once by xkb, once by niri).
+    // Mod+Space       { switch-layout "next"; }
+    // Mod+Shift+Space { switch-layout "prev"; }
+
+    // --- 截图 ---------------------------------------------------------------
+    Print { screenshot; }
+    Ctrl+Print { screenshot-screen; }
+    Alt+Print { screenshot-window; }
+
+    // --- 会话与系统控制 -----------------------------------------------------
+    // 重启 Waybar 状态栏。
+    Mod+F11 repeat=false hotkey-overlay-title="Restart Waybar" { spawn-sh "pkill waybar; exec waybar"; }
+
+    // Applications such as remote-desktop clients and software KVM switches may
+    // request that niri stops processing the keyboard shortcuts defined here
+    // so they may, for example, forward the key presses as-is to a remote machine.
+    // It's a good idea to bind an escape hatch to toggle the inhibitor,
+    // so a buggy application can't hold your session hostage.
+    //
+    // The allow-inhibiting=false property can be applied to other binds as well,
+    // which ensures niri always processes them, even when an inhibitor is active.
+    Mod+Escape allow-inhibiting=false { toggle-keyboard-shortcuts-inhibit; }
+
+    // The quit action will show a confirmation dialog to avoid accidental exits.
+    Mod+Shift+E { quit; }
+    Ctrl+Alt+Delete { quit; }
+
+    // Powers off the monitors. To turn them back on, do any input like
+    // moving the mouse or pressing any other key.
+    Mod+Shift+P { power-off-monitors; }
+}

config/waybar/config.jsonc

@@ -0,0 +1,78 @@
+// Waybar 基础配置（适用于 niri）
+{
+    "layer": "top",
+    "position": "top",
+    "height": 32,
+    "spacing": 8,
+
+    "modules-left": [
+        "custom/arch-workspaces",
+        "custom/musicfox-lyrics"
+    ],
+    "modules-center": [
+        "custom/center-clock"
+    ],
+    "modules-right": [
+        "pulseaudio",
+        "network",
+        "cpu",
+        "memory",
+        "tray"
+    ],
+
+    "custom/arch-workspaces": {
+        "exec": "printf ''",
+        "interval": 3600,
+        "tooltip": false
+    },
+
+    "custom/musicfox-lyrics": {
+        "exec": "/home/skyroy/Documents/code/musicfox-waybar-lyrics/musicfox_lyrics.py",
+        "return-type": "json",
+        "restart-interval": 5,
+        "escape": true,
+        "on-click": "playerctl --player=musicfox play-pause",
+        "on-scroll-up": "playerctl --player=musicfox next",
+        "on-scroll-down": "playerctl --player=musicfox previous",
+        "max-length": 70,
+        "tooltip": true
+    },
+
+    "custom/center-clock": {
+        "exec": "day=$(date +%u); case $day in 1) week=星期一;; 2) week=星期二;; 3) week=星期三;; 4) week=星期四;; 5) week=星期五;; 6) week=星期六;; 7) week=星期日;; esac; date \"+$week • %Y年%m月%d日 • %H:%M:%S\"",
+        "interval": 1,
+        "tooltip": false
+    },
+
+    "pulseaudio": {
+        "format": "{volume}% {icon}",
+        "format-muted": "静音",
+        "format-icons": {
+            "default": ["", "", ""]
+        },
+        "on-click": "pavucontrol"
+    },
+
+    "network": {
+        "format-wifi": "{essid} {signalStrength}% ",
+        "format-ethernet": "{ipaddr} 󰈀",
+        "format-disconnected": "未连接"
+    },
+
+    "cpu": {
+        "format": " {usage}%"
+    },
+
+    "memory": {
+        "format": " {percentage}%"
+    },
+
+    "clock": {
+        "format": "{:%Y-%m-%d %H:%M}",
+        "tooltip-format": "<big>{:%Y年%m月}</big>\n<tt><small>{calendar}</small></tt>"
+    },
+
+    "tray": {
+        "spacing": 8
+    }
+}

config/waybar/style.css

@@ -0,0 +1,60 @@
+/* Waybar 独立磨砂玻璃模块 */
+* {
+    border: none;
+    border-radius: 0;
+    font-family: FontAwesome, sans-serif;
+    font-size: 13px;
+    min-height: 0;
+}
+
+window#waybar {
+    background: transparent;
+    color: #cdd6f4;
+}
+
+#custom-arch-workspaces,
+#custom-musicfox-lyrics,
+#custom-center-clock,
+#pulseaudio,
+#network,
+#cpu,
+#memory,
+#clock,
+#tray {
+    margin: 4px 3px;
+    padding: 0 12px;
+    border: none;
+    border-radius: 8px;
+    background: rgba(30, 30, 46, 0.55);
+    box-shadow: none;
+}
+
+#custom-arch-workspaces {
+    margin-left: 8px;
+    color: #89b4fa;
+    font-size: 16px;
+}
+
+#custom-musicfox-lyrics {
+    color: #cdd6f4;
+}
+
+#custom-musicfox-lyrics.hidden {
+    margin: 0;
+    padding: 0;
+    min-width: 0;
+    background: transparent;
+}
+
+#custom-center-clock {
+    color: #cdd6f4;
+    font-weight: bold;
+}
+
+#clock {
+    color: #89b4fa;
+}
+
+#tray {
+    margin-right: 8px;
+}

config/waypaper/config.ini

@@ -0,0 +1,39 @@
+[Settings]
+language = en
+backend = awww
+folder = ~/Pictures/wallpaper
+monitors = All
+wallpaper = ~/Pictures/wallpaper/wallhaven-3q2zdd.jpg
+show_path_in_tooltip = True
+fill = fill
+sort = name
+color = #ffffff
+subfolders = False
+all_subfolders = False
+show_hidden = False
+show_gifs_only = False
+zen_mode = True
+post_command = 
+number_of_columns = 3
+swww_transition_type = any
+swww_transition_step = 63
+swww_transition_angle = 0
+swww_transition_duration = 2
+swww_transition_fps = 60
+mpvpaper_sound = False
+mpvpaper_options = 
+use_xdg_state = False
+stylesheet = /home/skyroy/.config/waypaper/style.css
+keybindings = ~/.config/waypaper/keybindings.ini
+wallpaperengine_folder = ~/.steam/root/steamapps/workshop/content/431960
+linux_wallpaperengine_clamp = none
+linux_wallpaperengine_volume = 15
+linux_wallpaperengine_silent = False
+linux_wallpaperengine_noautomute = False
+linux_wallpaperengine_no_audio_processing = False
+linux_wallpaperengine_fps = 30
+linux_wallpaperengine_disable_particles = True
+linux_wallpaperengine_disable_mouse = False
+linux_wallpaperengine_disable_parallax = False
+linux_wallpaperengine_no_fullscreen_pause = False
+